Linux mtoolstest Command

Linux Command Reference

The Linux mtoolstest command is used to test and display mtools-related settings.

mtoolstest is an mtools tool directive that reads and analyzes the mtools configuration file and displays the results on the screen.

Syntax

mtoolstest

Examples

Enter mtoolstest directly on the command line to display the current configuration information of the mtools package, with results as follows:

$ mtoolstest #显示mtools 软件包当前的配置信息  
drive J: #mtools软件包当前的配置信息列表  
#fn=0 mode=0 builtin  
file="/dev/sdb4" fat_bits=16 
tracks=0 heads=0 sectors=0 hidden=0 
offset=0x0 
partition=0 
mformat_only  
drive Z:  
#fn=0 mode=0 builtin  
file="/dev/sdb4" fat_bits=16 
tracks=0 heads=0 sectors=0 hidden=0 
offset=0x0 
partition=0 
mformat_only  
drive X:  
#fn=0 mode=0 builtin  
file="$DISPLAY" fat_bits=0 
tracks=0 heads=0 sectors=0 hidden=0 
offset=0x0 
partition=0 
drive A:  
#fn=2 mode=128 defined in /etc/mtools.conf  
file="/dev/fd0" fat_bits=0 
tracks=0 heads=0 sectors=0 hidden=0 
offset=0x0 
partition=0 
exclusive  
drive B:  
#fn=2 mode=128 defined in /etc/mtools.conf  
file="/dev/fd1" fat_bits=0 
tracks=0 heads=0 sectors=0 hidden=0 
offset=0x0 
partition=0 
exclusive  
drive M:  
#fn=2 mode=0 defined in /etc/mtools.conf  
file="/var/lib/dosemu/hdimage.first" fat_bits=0 
tracks=0 heads=0 sectors=0 hidden=0 
offset=0x80 
partition=1 
drive N:  
#fn=2 mode=0 defined in /etc/mtools.conf  
file="/var/lib/dosemu/fdimage" fat_bits=0 
tracks=0 heads=0 sectors=0 hidden=0 
offset=0x0 
partition=0 
mtools_fat_compatibility=0 
mtools_skip_check=0 
mtools_lower_case=0 

Linux Command Reference